Jump to content

The_Joker_07

Members
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. The_Joker_07

    XBox One Controller Connectivity Issue

    Hi @AndersNilsen , No, I didn't implement disable_ertm in startup cuz I didn't use my XB 1 controller afterward. I decided to stick to my XB 360 controller.
  2. The_Joker_07

    XBox One Controller Connectivity Issue

    Hey @AndersNilsen, Were you able to use your XB1 wireless controller as a mouse? did the following command work: sudo xboxdrv --detach-kernel-driver --silent --mouse I wasn't able to use my XB 1 controller as a drive since Xboxes doesn't recognize XB1 controller no matter how I connect it (Bluetooth or Wired). I was able to use my Xbox 360 controller though.
  3. The_Joker_07

    XBox One Controller Connectivity Issue

    Hi @Emmet , I have an update. So even though my Xbox One controller connects to the PI and responds to button press, the xboxdrv doesn't seem to recognize the controller. So I decided to hook up my Xbox 360 controller with the wireless receiver and now xboxdrv recognizes the controller and I could use the controller as a mouse. So, does that mean Xbox one controller is not supported?
  4. The_Joker_07

    XBox One Controller Connectivity Issue

    Dear @Emmet, Thanks for the prompt response. Here's what I got: sudo jstest /dev/input/js0 works like a charm. I do see a bunch of numbers and they respond to button press. I tried all the buttons and got a response. However, when I enter: sudo bash -c echo 1 > /sys/module/bluetooth/parameters/disable_ertm I get this: bash: echo 1 > /sys/module/bluetooth/parameters/disable_ertm: Permission denied. So my friend and I were trying to troubleshoot this early in the morning. After digging around some other forums, it turned out you have to use double quotes or single quotes. So we used this instead. sudo bash -c "echo 1 > /sys/module/bluetooth/parameters/disable_ertm" Just to make sure whether it worked or not I entered, cat /sys/module/bluetooth/parameters/disable_ertm and I got this: Y By the way, we also found out that this change is not permanent. Every time I reboot my pi, I had to run sudo bash -c "echo 1 > /sys/module/bluetooth/parameters/disable_ertm" to disable ertm. Last but not least, I still get the same error "No Xbox or Xbox 360 Controller found" when I enter: sudo xboxdrv --detach-kernel-driver --silent --mouse I get the error regardless whether I connect the Xbox one controller via usb cable or bluetooth. I have attached some screenshots.
  5. Hi, I'm new in this forum. So, I was trying to connect my Xbox One controller to my Raspberry Pi 3b+ running on Raspbian (stretch). I was following this tutorial here: https://pimylifeup.com/xbox-controllers-raspberry-pi/ So I was able to update all the packages by running the following 2 commands, easy: sudo apt-get update sudo apt-get upgrade I was able to install the xboxdrv without any issue. then I installed the joystick toolset. No issues so far. Then I connect my Xbox One controller via USB cable and it lights up and vibrates to indicate that it has connected successfully. I typed lsusb to make sure the controller is detected, which it is. But then when I type the following command: sudo apt-get install jstest /dev/input/js0 I get this: Reading package list ... Done E: Unsupported file /dev/input/js0 given on command line. So, I ignore it for the moment and move on to the next step and I type: sudo xboxdrv --detach-kernel-driver --silent --mouse And I get this error: -- [ ERROR ] ---------------------------------------------------------------- No Xbox or Xbox 360 Controller found. I tried to disconnect and reconnect my controller, plugged it into a different USB port and rebooted my Raspberry Pi. I also made sure the firmware of the controller is updated to the latest version. But NO luck at all. I'm getting really frustrated at this point and about to give up. Does Raspberry Pi even support XBox One controller or just Xbox 360 controller? I also tried to connect my Xbox One controller via Bluetooth and I got the following error message: "Paired successfully, but this device has no services which can be used with Raspberry Pi". Please help out this noob here. Any input would be appreciated. Thanks.
×